Product Range

RapidBuild offers a range of services dedicated to provide a seamless user service package. A full and complete understanding of the system is essential and we have a range of training courses designed to ensure the user knows exactly how to implement the system effectively to allow the building methodology to work to its full potential.

 
 
 

External wall brace.

  • 1 – RBB

    RapidBuild Brace

    The longer section of the RapidBuild brace is inserted into the wall between the 2 holes and connected to the scaffolding. The smaller section of the brace has a round tubular piece of steel which fits inside the scaffolding pole and is then braced with the sleeve.

  • 2 – RBS

    RapidBuild Sponge

    The RapidBuild sponge shock absorber fits between 2 sections of the brace to act as a suspension unit when the scaffolding moves.

  • 3 – RBVB

    RapidBuild Vertical Bar
    Slide each RapidBuild vertical bar between the holes in the brace and base plate leaving equal sections at the top and bottom ready for the wedge to be installed.

  • 4 – RBW

    RapidBuild Wedge

    Slot each RapidBuild wedge in each of the 2 holes in the brace and base plate on both sides and press firmly down. To ensure stability use rubber hammer to wedge.

  • 5 – RBBP

    RapidBuild Base Plate
     The RapidBuild base plate slots into the wall directly below the brace.

  • 6 – RBC

    RapidBuild Bolts, Nuts & Washers (Consumables)

    RapidBuild bolts, nuts and washers fit between the brace to hold the components together.

Internal wall brace.

  • 7 – RBBP

    RapidBuild Base Plate

    The RapidBuild base plate slots into the wall directly below the brace. The base plate is also at higher stages on the internal wall brace only.

  • 8 – IVB

    RapidBuild Internal Vertical Bar (1m, 1.5m & 2m)

    Slide each RapidBuild internal vertical bar between the holes in the brace and base plate leaving equal sections at the top and bottom ready for the wedge to be installed.

  • 9 – RBW

    RapidBuild Wedge
    Slot each RapidBuild wedge in each of the 2 holes in the brace and base plate on both sides and press firmly down. To ensure stability use rubber hammer to wedge.